Specifications

• 3.5” size drive foot print

• PCI V2.2 compliant

• On-board low power VIA Eden 667MHz processor EBGA package with 133MHz FSB EBGA package with 133MHz FSB.

• 128K L1 cache memory and 64KB L2 cache memory on-die

• Max. 512MB SDRAM memory, 144-pin DIMM x1

• Award system BIOS

• APM(Advanced Power Management) support

• ACPI(Advanced Configuration & Power Interface) support

• 4M bits flash ROM

• VIA 8601A 100/133MHz North Bridge

• VIA VT82C686B PCI SUPER-I/O integrate peripheral controller

• PCI V2.2 compliant

On board VGA

• VIA 8601A Integrated Savage 4 3D/2D Video Accelerator, supports 2/4/8MB frame buffer ; High quality DVD video playback ; 3D/2D resolutions up to 1280x1024 and 3D rendering features

• Extensive LCD support: 18- or 24-bit TFT flat panel interface, resolutions 640x480/800x600/1024x768 ; TMDS (Panel Link) interface (Optional), resolutions up to 1024x768.

• TV-Encoder Interface (Optional)

 On Board LAN

• ADMTek AN983B Ethernet LAN portx1

• RJ45 with LED connector x1

• Full duplex compliant with IEEE802.3X

• Boot from LAN function

• Wake-up from LAN

• VT82C686B and AC97 ver. 2.0 compliant interface, Multi-stream Direct Sound and Direct Sound 3D acceleration

• USB portx2

• Buzzerx1

• Audio Interface:
  Internal - CD audio-in, Line-in, speaker-out
  Phone Jack - Microphone-in, speaker-out

• Enhance IDE: Ultra DMA 33/66/100 support; 44-pin connector x2

• SIO(with 2 16C550 UARTs)x2, 9-pin headerx2

• PIO x1, 26-pin connector support EPP/ECP

• Slim FDD controller: 26-pin connectorx1

• PS/2 keyboard/Mouse: 6-pin mini DIN connector

• Digital I/O TTL level (2-in/out).

• I²C: on-board 3-pin headerx1 (one pin for GND)

• Reset SW: 2-pin headerx1

• IDE active LED: 2-pin headerx1

• ATX power SW: 2-pin headerx1

• Power cable connected to panel(5V or 3V):3-pin powerheaderx1

• 2-pin IDE Active LED headerx1

• Derived from super I/O support system monitor

• 4 voltage(for +3.3V, +5V, VTT, Vcore)

• Monitor CPU fan speed, CPU temperature

• Driver support: Window® 95/98/2000, Windows NT4.0

• On-chip RTC back-up battery x1
• External Li-Ion batteryx1

• Watchdog timeout programmable from 1 to 127 second/minute

• Mini-PCI socket

• 143mm(L)x102mm(W)

• 2-pin power input connector

  PIN Define	Voltage	Power Requirement
  PIN 1	+5V	3.5A (typical)
  PIN 2	GND

• Reserve 3-pin header for 5Vsb to support ACPI function

• 3.3V is converted from +5V

• Accessory power converter cable:
  AT power supply: two 4P to 2P
  ATX power supply: 2-pin+ 3-pin (For standy by 5V/PS-ON ) power connector

• Operating temperature: 0°Cto 60°C

• Storage temperature: -20°C to 80°C

• Relative humidity: 10% to 90%(noncondensing)

• CE
• FCC

Order Information

EBC 365LP6

3.5” Ultra low power embedded CPU fan-less solution with on-board VIA Eden 667MHz processor.

                                                                                                                                   《返回》